Company will ship 29 broadband and single-channel antennas to support channel relocation, and prepare the stations for future ATSC 3.0 broadcast opportunities
RAYMOND, Maine – August 9, 2017 –Dielectric, a pioneer in purpose-engineered antennas and RF systems for TV and radio broadcasters, today announced that Raycom Media, a major TV station group based in Montgomery, Alabama, has placed a large order for 29 Dielectric UHF and VHF antennas, tunable RF Filters and transmission line to facilitate channel changes for its stations affected by the spectrum repack.
The antenna order includes several Dielectric TFU-WB UHF arrays, a low-cost, sidemount, UHF broadband pylon antenna that delivers higher voltage handling, 75% less windload, lower overall weight, and greater cost-efficiency compared with UHF panel antennas. The order additionally includes TFU-G, TFU-E, TFU-J UHF arrays, as well as THV VHF arrays. Most arrays incorporate elliptical polarization for enhanced reception performance in ATSC 1.0, and in preparation for ATSC 3.0.
As one of the nation’s largest and fastest growing broadcast groups, Raycom Media owns or provides services for 65 TV stations and two radio stations in 44 U.S. markets across 20 states. Together, these stations comprise 16% of U.S. TV households.
TV stations that are subject to the spectrum repack must relocate to their new channel assignments according to the FCC’s 39-month transition schedule. Cognizant of the time-constraints many broadcasters face throughout the repack process, Dielectric has modified its antenna design and manufacturing processes to ensure operational efficiency and accelerated delivery. Dielectric will ship the new antennas to Raycom Media tower sites between September 2017 and February 2020.
Raycom Media stations assigned to the first or second phases will receive their new antennas in Q3 and Q4 of this year. For Raycom Media stations scheduled for later phases, Dielectric will have the antennas ready three to six months prior to their respective deadlines.
“As Dielectric antennas have been broadly installed across our station group, the company had records detailing our stations’ unique antenna patterns,” said Bob Thurber, vice president of engineering, Raycom Media. “This, along with the level of technical and commercial support we have received, made planning for the repack that much easier. We’re confident that Dielectric will facilitate our complex, multi-station transition and meet the demanding requirements of the spectrum repack.”
Jay Martin, Vice President of Sales for Dielectric, notes that the TFU-WB UHF arrays are especially attractive to broadcasters faced with the challenges and opportunities of channel relocations. With its broadband capability and robust power input of 60kW, the TFU-WB antenna can accommodate multiple channels simultaneously. Many of Raycom Media’s new antennas will serve as auxiliary or interim antennas that keep channels on the air until permanent antennas are in place. These same arrays will serve as standby arrays for future emergency needs.
Since Dielectric’s TFU-WB antennas provide a higher voltage handling capability and higher peak to average power ratio (PAPR) than competing antennas, Raycom Media is also investing in technology that is capable of broadcasting in the next-generation, IP-based ATSC 3.0 broadcast standard. Post-transition, these antennas can be redeployed in Single Frequency Networks (SFN). In this configuration, several smaller transmitters operate in sync with the main transmitter signal to boost the signal across the coverage area.
The Raycom Media order also includes new Dielectric tunable RF filters—waveguide designed for exceptional power rating and air-cooled for operational efficiency—along with multiple runs of rigid transmission line.
“We’re extremely pleased that Raycom Media has again demonstrated faith and confidence in our products, service and support. Over many years, our two companies have developed a mutually rewarding relationship based on trust,” said Martin. “Our commitment to Raycom Media is to have their new antenna systems ready to go well before their transition deadlines and to exceed their expectations across all fronts.”
Based in Raymond, Maine, Dielectric LLC is a wholly owned subsidiary of Sinclair. Dielectric is a leading provider of innovative broadcast products. From remote stations to major markets, Dielectric has been delivering solutions for every need since 1942. Dielectric is an innovative, customer-centric organization with a long history of engineering excellence in designing and manufacturing high-quality broadcast solutions. The Company is a trusted partner of broadcasters worldwide. More information can be accessed at www.dielectric.com
Latest posts by Dimension PR (see all)
- Cox Connecticut Public Access Drives Community TV Forward with HITACHI HDTV Cameras - February 22, 2018
- Dielectric to Showcase ATSC 3.0-Compatible Spectrum Repack Antennas at the 2018 NAB Show - February 20, 2018
- ENCO to Unveil Powerful TV Automation and Production Advances at 2018 NAB Show - February 20, 2018