CHAMPAIGN, Ill. — April 12, 2017 — Cobalt Digital today announced the launch of Channel Integrator, a new product that provides a single point of audio and video processing and control for converting a wide range of input sources and protocols to the desired outbound configuration. With Channel Integrator, Cobalt has combined more features and processes into a single system than any other manufacturer, enabling operators to consolidate workflows, eliminate multiple rack units of equipment, and consume less power.
Channel Integrator is designed for terrestrial over-the-air, direct-broadcast satellite, postproduction, and outside broadcast environments, as well as terrestrial cable/multiple system operators and over-the-top internet streaming providers. The high-density system can accept changing input formats (SD and HD) and detect and convert them to the specified output raster extremely quickly. As a result, it takes fewer converters to perform upstream conversions, and the unit can input format changes gracefully with minimal disruption to the output picture. The unit can also use AFD (Active Format Descriptor) metadata to ensure an ideal output raster, eliminating the possibility of problematic output such as a “postage stamp” image with black bars on the top, bottom, and sides.
Channel Integrator incorporates several other important processes:
Optional linear frame rate standards conversion allows the unit to accept and output video standards such as PAL to NTSC and vice versa, or HD 50 hertz to 60 hertz signals and vice versa. This functionality means Channel Integrator serves as a universal video processor that can adapt a foreign input video standard to meet the required output video standard.
Mosquito and block noise reduction yield an ideal output image that optimizes downstream video compression. Because downstream MPEG-2, H.264, or HEVC encoders don’t need to encode noise artifacts, the result is a lower-bit-rate, higher-quality encode. As a complement, Channel Integrator also includes a detail enhancement function, which enhances the appearance of edges and textures without enhancing the noise.
Integrated audio processing comes in the form of support for Linear Acoustic UpMax stereo-to-surround sound upmixing; Dolby E, AC-3, and E-AC-3 encoding, transcoding, and encoding; and Dolby’s real-time loudness leveling (RTLL). Additionally, the unit offers a wide range of routing, mixing, downmixing, and audio-processing controls such as gain, inversion, and per-channel delay.
Channel Integrator also offers RGB color correction and YCbCr video processing for color matching and optimization, and frame-accurate DPI trigger insertion. Furthermore, composite analog video and analog inputs and outputs allow for integration to legacy systems, making Channel Integrator an ideal solution for operators in evolving markets that are still transitioning from analog to digital.
Because Channel Integrator can be configured to recall settings automatically based on predefined input states, users can set it and forget it. The product is compatible with Cobalt’s OGCP-9000 Series of remote control panels and the openGear(R) DashBoard GUI, both of which can be configured to expose only the controls and status indicators that are pertinent to the operator. The unit is also SNMP-enabled and can be run under automation control.
Channel Integrator is available as a 9902-UDX-DSP-CI openGear card deployed with a passive rear module in a 20-slot openGear frame. Optionally, an expanded rear module is available that allows for additional analog audio I/O along with a SFP+ cage that paves the way for HDMI input or output; fiber-optic transmission, receiving, or transceiving; or a SMPTE 2110/2022-6 encapsulator or de-encapsulator. With the optional expanded rear module, the Channel Integrator’s channel density is reduced to 10 channels of processing per 2 RU.
“Cobalt is well-known for offering the highest quality signal processing in the smallest footprints possible, and the comprehensive Channel Integrator is the culmination of Cobalt’s expertise in this area,” said Jesse Foster, director of product and business development at Cobalt Digital. “With it, customers get a small footprint, highly integrated video up/down/cross-scaling, frame sync, and an advanced video and audio signal processor in their choice of form factors.”
# # #
About Cobalt Digital
Cobalt Digital Inc. designs and manufactures award-winning 12G/3G/HD/SD and IP-based conversion, terminal, throwdown, and multiviewer technology for the broadcast television environment. As a founding partner in the openGear(R) initiative, Cobalt offers a full range of openGear video and audio processing card solutions for applications such as closed-caption compliance monitoring, OB production, master control, HD news production, signal transport, audio loudness, and color correction. Cobalt’s Blue Box Group(TM) line of interface converter boxes streamlines and simplifies a wide range of 12G/3G/HD/SD and IP-based conversion and signal transport tasks. The company’s multi-image display processors enable multiviewer capabilities in the most demanding studio and remote broadcasting environments. Distributed through a worldwide network of dealers, system integrators, and other partners, Cobalt Digital products are backed with a five-year warranty. More information is available at www.cobaltdigital.com.
Image Link: www.wallstcom.com/Cobalt/Cobalt-Digital_CDI-ChannelIntegrator.png
Image Caption: Channel Integrator Logo
- Life Church Selects VITEC Houses of Worship Streaming Solutions - October 8, 2019
- Now Accepting Presentation Proposals for IP Showcase Theatre at METExpo 2019 in Sydney - June 6, 2019
- Videon Products at the 2019 NAB Show - March 19, 2019