Home » News » COLIN BROAD TO LAUNCH TMC-1-PENTA AT NAB 2015 – THE COMPLETE DIGITAL AUDIO I/O AND MONITORING SOLUTION
interconnections for the TMC-1 and NTP Penta 720 or DAD AX32 for digital monitoring and DAW I/O

COLIN BROAD TO LAUNCH TMC-1-PENTA AT NAB 2015 – THE COMPLETE DIGITAL AUDIO I/O AND MONITORING SOLUTION


AlertMe

CB Electronics press announcement
For immediate release

See Colin Broad and the new TMC-1-Penta on the Plus 24 booth C4051 in the Central Hall at NAB 2015, Las Vegas Convention Center, April 11-16

COLIN BROAD TO LAUNCH TMC-1-PENTA AT NAB 2015 – THE COMPLETE DIGITAL AUDIO I/O AND MONITORING SOLUTION
Accompanying image shows interconnections for the TMC-1 and NTP Penta 720 or DAD AX32 for digital monitoring and DAW I/O

London 17th March 2015: CB Electronics (www.colinbroad.com) in cooperation with NTP Technology (www.ntp.dk) have developed a digital version of the TMC-1 monitor controller TMC-1-P

enta, which will be launched at NAB 2015. The TMC-1-Penta communicates with a NTP Penta 720 or DAD AX32 over ethernet using its native protocol either directly or over a network. The software is based on the XMON version of the TMC-1 with a number of enhancements including the ability to control up to 48 channels on its main input/output and an 8 channel wide stem mixer. The flexibility of the NTP Digital interface allows the incorporation of extra features that are not available on Avid’s XMON.

The DAD AX32/NTP Penta combines direct connection to Avid’s Pro Tools HD/HDX/HD Native systems with superb A2D/D2A converters, MADI, AES and SPI. The combination of the DAD AX32 / NTP Penta with the TMC-1-Penta provides a cost effective digital I/O and monitoring solution for any studio.

The accompanying block diagram shows how to use the TMC-1 and NTP Penta 720 or DAD AX32 for digital monitoring and DAW I/O. The Penta 720/AX32 provides all the I/O routing with 16 AES I/O channels, MADI and direct connection with Pro Tools as standard. Also available as optional cards are analogue I/O, Dante, SDI and other interfaces providing up to 976 input channels and 976 output channels.

Visit NTP Technology on the Plus 24 booth C4051, Central Hall at NAB 2015, where Colin Broad will be pleased to explain the many features of the new TMC-1_Penta.

Further information from:
CB Electronics
Tel +44 (0) 1189 320345
[email protected]
www.colinbroad.com

CB Electronics are specialists in Time Code, Biphase, Serial Control and Remote Control. Colin Broad is the man behind CB electronics. For years, the film and broadcast community have relied on his expertise to solve a range of problems in the area of machine and system control. In fact, you would have to search hard to find a UK film dubbing theatre without at least one of his products, known to all as ‘Broad Boxes’. They are also a common sight in dubbing theatres across the world. Because big film dubbing theatre requirements are so complex most of the previous products have tended to involve a degree of customisation to suit individual requirements.

In 1994 Colin Broad received an Academy of Motion Picture Arts and Sciences Technical Achievement Award in the category of Sound for the design and development of EDL (Edit Decision Lister) which creates encoded time code track and database during the initial transfer of the production sound dailies.

In 1994 Colin Broad was awarded the BKSTS Phil Berkley award for his work in Video Post production.
In 1996 CB Electronics Received the Satis-Fecit for the SR-4
In 2010 Colin Broad was made a Fellow of The Association of Motion Picture Sound.

NTP Technology develops, manufactures and distributes advanced high reliability digital routing solutions for major international radio and television broadcasters.

Top quality, innovative technology and perfection in performance are the reasons that NTP Technology today is chosen by leading broadcasters in many parts of the world.
Software and hardware development are performed by skilled NTP Technology engineers.
Hardware is manufactured by selected ISO approved sub-suppliers for flexibility and high sustained quality. Final assembly, test and quality control are performed at NTP Technology premises by skilled NTP Technology engineers before shipment.

In December 2008 NTP Technology acquired Digital Audio Denmark (DAD), one of the world’s leading manufacturers of high-quality analogue-to-digital and digital-to-analogue converters.

NTP was founded in 1958. Since 2003 NTP Technology has been a member of the Dan Technologies A/S group of companies. Dan Technologies A/S is one of the largest suppliers in the Nordic region of professional video, audio and system solutions for radio and television stations as well as production and post production companies. Dan Technologies has more than 125 employees.

 

interconnections for the TMC-1 and NTP Penta 720 or DAD AX32 for digital monitoring and DAW I/O

interconnections for the TMC-1 and NTP Penta 720 or DAD AX32 for digital monitoring and DAW I/O

***

Attached 300 dpi graphic:

Interconnections for the TMC-1 and NTP Penta 720 or DAD AX32 for digital monitoring and DAW I/O
Further Press information:

Colin Broad
CB Electronics
[email protected]

Mel Noonan
Stylus Media Consultants
[email protected]


AlertMe
Do NOT follow this link or you will be banned from the site!